Common Mirror Resilvering Questions

Frequently asked Mirror Re-silvering questions

Q: Is re-silvering needed?

A: Sometimes mirrors appear to be dirty or streaked on the front surface. The silvering on the back has no problem. So clean the mirror surface properly to check that it has no damage on the front surface.

 

Q: Is it possible to re-silver a small portion of the mirror?

A: Yes, it is possible to re-silver a portion of your mirror to re-silver. Unfortunately, satisfactory results are not guaranteed and are not always achieved by doing so. If you want the best result a complete re-silvering of the mirror is recommended.

 

Q: How long does Re-silvering last?

A: The re-silvering should last for decades. However, we can’t control the conditions in which mirrors are hung or mounted. Bathroom mirrors or other mirrors subject to excessive moisture has higher chances of getting disturbed quicker than mirrors in the bed room or other places.

 

Q: What is used to silver the surface of the mirror?

A: In Earlier mirror making silver was used to coat the glass surface. But in more recent times sputtering powdered aluminum or other compounds have been used in the place of silver. Therefore today, this process is also known as aluminizing. Which makes this service more cost effective.

 

 

Q: What if the edge of the m irror has Deterioration?

A: This is very common, frequently occurring on bathroom mirrors where moisture has puddled on the edges. It might not have been installed or sealed properly in the first place. If the mirror is large simple rectangle without bevels it will be cheaper to buy a new mirror than to have it re-silvered. One solution for the problem is to cut off the damaged area and then remount the mirror. Bear Glass also provides mirror cutting services for any thickness.

 

Q: Does Silver Paint touch up works as re-silvering?

A: No, It doesn’t. Using paint for re-silvering a mirror will get disappointing results. Mirror re-silvering process does involve many steps and techniques that is not possible at home unless you have the proper knowledge.

 

Get more information On all Fancy glass and mirrors has to offer by clicking here

 

nano silver mirror spray on chrome

Fancy Glass and Mirrors
+1 (929) 777-5535

info@fancyglassandmirrors.com

Glass Cutting with Waterjet

Abrasive waterjet cutting technology is a great method for cutting glass because it allows for contours and shapes that cannot be achieved with other cutting machines at a reasonable cost.

From artistic tabletop inlays to detailed stained glass designs, mirrors, glass ornaments, replacement windows for antique cars, and more, there’s almost no glass cutting application that a waterjet cutting machine can’t tackle.

Glass has a tendency to crack, so it is very important that the initial holes are produced with a reduced pressure of 7,200 PSI/500 bar to 11,600 PSI/800 bar. Subsequently, the pressure must be increased to a cutting speed that is cost-effective. For glass, ceramics and other brittle materials, you must gradually increase and reduce the cutting pressure by means of proportional pressure control of the intensifier pump, otherwise the material would be destroyed.

As an alternative to quartz sand, olivine can be used as an abrasive because it is softer, which reduces the potential for chipping, cracking and other surface blemishes and leaves a cut edge that is polished to a smooth finish.

Because water jet cutting does not vibrate the glass, there is no heat-affected zones (HAZ), or leave behind rough edges, almost no secondary finishing is required.

WATERJET CUTTING SPEEDS
These cut speeds result in a very smooth, burr-free edge that require no second operation finish.

ADVANTAGES OF CUTTING GLASS WITH WATERJET

• Cut glass geometry that common machining cannot perform
• Delicate glass does not crack during processing
• Precisely cut thin to thick glass without changing any tooling
• Cuts glass panels up to 9″ (23 cm) in thickness
• Eliminates pressure of cutting process on surface material
• No heat affected zone (HAZ)
• No tool to sharpen
• No or reduced need for reworking of the cut edge
• No waste of material, narrow cutting gap
• Cost effective means of cutting holes in glass
• Create intricate design in any shape and size
(Not suitable for the processing of tempered or hot glass)

Everyday Uses

• Tabletop inlay
• Flat glass with numerous contours
• Stained glass
• Church mosaics
• Frameless shower screens
• Bullet-proof glass
• Mirrors
• Kitchen and bathroom splash backs
• Laminated glass
• Lenses
• Glass components for electronic & medical industry
• Glass ornaments

Fancy Glass and Mirrors
+1 (929) 777-5535

info@fancyglassandmirrors.com

Mirror, mirror on the wall

We all know the importance of mirrors and how they can open up a space and make a room seem larger. The tricky bit however, is how to achieve it. It’s not simply about hanging a mirror on a wall and you’re done.


First of all, make sure you keep the mirror flat against the surface you hang it to, otherwise you risk altering the image it’s reflecting. Height is another aspect to think about. Consider what you need to reflect, i.e. yourself and the room. In a dining room, the mirror should reflect the table and create an ambiance, it shouldn’t reflect the ceiling.

If the mirror is the key piece in your room, in other words, a decorative mirror, you should hang it high. Free standing mirrors that you lean against a wall are ideal to create the illusion of space, just bear in mind that the mirror should be 3/4 as tall as the wall it’s leaning against. Mirrors double what they’re placed opposite so heads up if you’re placing a mirror in front of a cluttered space.

Mirrors are great for dark spaces and can light up corners, therefore they’re perfect for dim-lit hallways. Beware of placing a mirror at the end of a hallway however, as in feng shui it’s believed to prevent good energy flow. As mirrors can act as a spare window, bringing more light in, they need to reflect already natural light or light from lamps.
Mirrors needn’t necessarily be traditional, in the sense of square and framed, they can serve different purposes too.

Modern Console Tables

Glass Furniture
Glass Furniture NYC allows light to flow freely throughout your compact home, giving the appearance of a bigger space.

Once you invest in a console table you’ll find it a really helpful addition to your home.

Morena Glass Coffee Table

Morena Glass Coffee Table

It will often provide much needed space for essentials like keys, clocks, and phones. Perhaps use in a dining room to give you extra serving storage?

A console table will offer a place for plates, glasses or bottles to be on display.

They are practical, useful and can be beautiful too! When choosing what sort of console table you want, have a think about the room you it’s going in and how you’ll use it.

Modern Contemporary Console Table

A modern console table can work well in classical settings too as long as you get the styling balance right.

You can create a sort of eclectic look. If you have enough space in your home it might be worth considering console tables with storage for an added space saving bonus.

Our ARABELLA glass console table is a stunning work of art.

The base panels are nicely shaped and fixed together with the help of Glass-to-Glass corner clamps which are strong and safe for long term use.This table has been designed with form and function in mind.

It can be used in any home and be a perfect place for displaying items.Please note we can make this table from different glass type and colour.

For more information please contact our managers team.

A glass hallway table creates a perfect ‘stage’ for creating a dramatic entrance to your home and our lovely GALLON MIRRORED CONSOLE TABLE console provides a great surface for decorative objects.

Gallon Mirrored Console Table without interior

Gallon Mirrored Console Table without interior

9 Styling tips for your Console Table:
So, when you decide that you need one of these little gems in your life, here are a few tips to consider when it comes to styling your console table.

(oh, and by the way, if you are thinking of one of these for your dining room – don’t forget to check out our stunning dining table ALCOR GLASS DINING TABLE incase you want a matching set!).

 

  • Consider changing the paint colour of the wall behind the console table. This will help to create a more dramatic, stylish look.
  • Does your flooring look plain? Have a look and see if you need to enhance the setting with a new rug to create more impact.
  • Think about your colour scheme. If you want to blend and combine patterns, as long as the colours are the same tones and hues they will mix perfectly without clashing.
  • Create height by either using something tall on the surface or use the wall behind to hang artwork. This is key, as it will help you frame the area and turn it into a focal point in your room.
  • Try to use some sort of foliage as it will breathe life into your arrangement.
  • If you have the space, think about expanding your console display area. We did this by using a floor standing lamp, but a tall plant would work equally well. By extending the arrangement, you’ll give it more substance in the room, whilst freeing up the useful surface area for other things.
  • If you want to stack books on the console but still want to create an attractive selection theres a few things you could try. Our top stylist tip is to either remove the dust jackets to see if the colours work nicely. Otherwise simply turn the books around so that the white pages are on display rather than the spines. Don’t forget to choose an attractive simple book to sit on the top.
  • Always group things in three’s. It really IS the magic number!
  • Remember that you can also use the space under the console table, but always style it neatly. Boxes and baskets can give you more storage and add to your setting. By choosing colours which blend with your chosen look will help create a effortlessly cool area.

For more information please contact our managers team.